1. Key Features:
* Super Capacity: Built-in 3.7V/ 10000mAh 986095 Li-Polymer Battery
* Fast Charge: Using QC18W, taking 3~5 hours to complete charge
* Charge Capacity Display: Using LED digital display charge capacity; Its precision up to 1%.
* Smart Switch: Its output(discharge) switch depends on devices. output ports are compatible with APPLE, SAMSUMG, BC1.2, PD3.0, QC3.0, PPS/QC4+,VOOC
* Protection Function: Over-discharger Protection, Output Short Protection, Output Over Current Protection, Over Temperature Protection, Input Over Voltage P Protection.
* Safety protection: Equipped with a dedicated lithium battery protection circuit, effectively preventing overcharging, discharging, overcurrent protection functions, etc;
* Multiple Output : Mirco USB/Type-C/Lightning/USB; can charge various products such as mobile phones and tablets
2. Input Charging Specifications:
2.1 Input Voltage Range
| Input Voltage |
Min |
Max |
Protocol |
| 5V |
4.7V |
5.35V |
QC2.0 |
| 9V |
8.55V |
9.45V |
QC2.0 |
2.2 Max Charger Input Current
| Input Voltage |
Min |
Max |
|
| 5V |
1.5A |
2.4A |
Ordinary |
| 5V |
1.5A |
3.4A |
QC2.0 |
| 9V |
1.5A |
2.4A |
QC2.0 |
2.3 Input Charging Efficiency
a.
5V/3A Charger: charging efficiency is >89%
b. Q2.0 9V/2A Charger: charging efficiency is >87%
2.4 Battery Specification
| Minimum Capacity |
10000mAH |
| Nominal Voltage |
3.7V |
| Internal Impedance |
45mΩ |
| Charge Cut-off Voltage |
4.2V |
| Standard Charge Current |
0.2C |
| Max Charge Current |
1C |
| Standard Discharge Current |
0.2C |
| Max Discharge Current |
1C |
2.5 Battery Package Charger Current
a. Type-C 5V Input Charger: 2.4A @ CV3.7V
b: Type-C 9V Input Charger: 4.2A @CV 3.7V
2.6 Pre-Charge Current: <400mA
2.7 Charge Time:
a. 5V/1A Charger: 8 - 10 hours
b. 5V/2.4A Charger: 3 - 5 hours
c. 5V/3A Charger: 3 - 5 hours
d. 9V/2A Charger: 3 - 5 hours
2.8 Safety Charge Time:
To avoid damage to the battery caused by prolonged charging, the power bank will forcibly turn off the charging after charging exceeds 33 ± 1 hour or trickle charging exceeds 40 minutes. At the same time, the power bank will display the charge capacity.
2.9 Charge Over-Voltage Protection:
When the charging voltage is ≥ 4.2 ± 0.05V, the power supply will turn off the charging circuit to protect the safety of the battery pack.
2.10 Charge Capacity Display:
Charge capacity will display on LED digital tube with the precition of 1%.
3. Charge While Discharge Funtion
3.1 Open Charge-While-Discharge function:
Both of the following operation methods can enable the mobile power supply to enter the charging and discharging state:
a. During the charging process, the power bank connects the load to the output USB port. The power bank simultaneously charges the built-in battery and load, and the current between the battery and load is automatically pulled by the load.
b. When the output USB port is loaded and working normally, connect a charger to the input port, the power bank simultaneously charge the built-in battery and load. The current between the battery and load is automatically pulled by the load.
c. When opening Charge-While-Discharge function, the input and output are automatically adjusted to 5V (fast charging function is turned off)
4. DC Output Specifications:
4.1 Output Specifications:
a. Type-C 5V/3A Output Spections:
| Output Voltage |
5.15V |
| Output Current |
3.0A |
| Over-Current Protection |
>3.2A |
b. Type-C 9V/2A Output Spections:
| Output Voltage |
9V |
| Output Current |
2.0A |
| Over-Current Protection |
>2.1A |
c. Type-C 12V/1.5A Output Spections:
| Output Voltage |
12V |
| Output Current |
1.5A |
| Over-Current Protection |
>1.6A |
d. Lightning 5V/2.4A Output Spections:
| Output Voltage |
5.15V |
| Output Current |
2.4A |
| Over-Current Protection |
>3.1A |
e. Lightning 9V/2A Output Spections:
| Output Voltage |
9V |
| Output Current |
2A |
| Over-Current Protection |
>2.1A |
4.2 Ripple & Noise
The ripple of output voltage is < 200mV
4.3 Discharge Output Capacity
| Output Load 5V/3A |
Discharge Efficiency > 88% |
| Output Load 9V/2A |
Discharge Efficiency > 87% |
| Output Load 12V/1.5A |
Discharge Efficiency > 86% |
4.4 Output Cut-off Current
When the power bank is in the discharge state, the output current is less than 100mA and lasts for 70 seconds before turning off the output.
4.5 Standby Consumption
The standby output current is less than 100uA
5. Safety Design Specification:
Enclosure Fire Prevention Level: 94V-0
6. Environmental Requirements
6.1 Temperature:
a. Working Temperature: Discharge -10ºC~35ºC; Charge 0ºC~35ºC
b. Storage Temperature: -10ºC~55ºC
6.2 Humidity
a. Working Humidity: 20 ~ 80%
b. Storage Humidity: 10 ~ 90%
7. Reliability Testing
7.1 PCBA Operation Life: 2 Years
7.2 Cell Life:
0.5C charge and discharge cycle for 400 times:
300 cycles: > 80% of initial capacity
400 cycles: > 60% of initial capacity
Thickness increase < 10% of initial measurement
Internal impedance does not exceed standard internal impedance
Audited Supplier 
){kind=link}
){kind=link}